Mannington Noble Oak Acorn: ADURA Max WPC Vinyl Tile

47” long Adura White Riser, 7-3/8” tall, ½” thick, White laminated particle board. Can be used as finish riser material for staircases using hardwood, laminate, LVT, or SimpleStairs® products.

If the staircase does not have an existing nosing (overhang). An MDF nose fill piece must be added to the front edge of every tread.

1 Gallon Mannington M-Grip™ transitional adhesive is a high-strength modified hard set acrylic adhesive with low VOCs and high-solids. It produces a permanent overnight bond to a wide variety of substrates and is specifically formulated to obtain tenacious sheer strength. M-Grip™ quickly transitions; fully cross-linking into a hard set to securely lock the flooring in place. M-Grip™ with its fast grab design handles the pressure of heavy rolling loads and high moisture environments. Made in the USA Benefits: • Aggressive tack, fast grab • High moisture tolerance • Permanent, high-strength, waterproof and elastomeric bond • Ideal for heavy rolling loads & high traffic • Installs LVF glue-down and vinyl-back sheet products • Bond warranty applies if used with other manufacturers’ like products • Residential, Light Commercial and Main Street rated and warranted • Excellent plasticizer migration resistance • Low VOC, extremely low odor • 250 sq. ft. coverage per gallon (1/16” x 1/32” x 1/32”) Approximate Sq Ft Coverage Vased on Trowel/Nap Roller Size : 1/16” x 1/16” x 1/16” U Notched Trowel - 150 sf coverage 1/32” x 1/32” x1/16” U Notched Trowel - 250 sf coverage 3/8”Nap Roller - 350 sf coverage Application Instructions: Follow Mannington’s guidelines for layout, design and any special precautions for installation. 1. Spread adhesive using required tools. 2. Install flooring per specific flooring type instructions. (flash and working times dependent upon temperature and humidity). Trowel: Flash time is 10-30 minutes. Adhesive will darken slightly to visually cue the installer. Working time up to 2.5 hours. Adhesive transfer required. Roll flooring with a minimum 75 lb. three section floor roller. 3/8” Nap Roller: Flash time is 20-40 minutes. Allow M-Grip™ to darken and become tacky. 2.5 hours working time. Curing Time: Mannington M-Grip™ has an approximate 12 cure time. 24 hours for heavy traffic and 48 hours for rolling load traffic. Exact cure time varies with temperature, humidity and porosity of materials/substrates. Store in a cool, dry area away from direct sunlight. Mannington M-Grip™ should be stored at temperatures between 50-90°F (15-32°C). While this product is freeze-thaw stable, it is necessary to protect it from freezing. Freeze/ thaw stable to 10°F (-12°C). Shelf life is two years on properly stored unopened containers; storing at elevated temperatures will reduce shelf life. Two year shelf life (unopened)

4 Gallon Mannington M-Grip™ transitional adhesive is a high-strength modified hard set acrylic adhesive with low VOCs and high-solids. It produces a permanent overnight bond to a wide variety of substrates and is specifically formulated to obtain tenacious sheer strength. M-Grip™ quickly transitions; fully cross-linking into a hard set to securely lock the flooring in place. M-Grip™ with its fast grab design handles the pressure of heavy rolling loads and high moisture environments. Made in the USA Benefits: • Aggressive tack, fast grab • High moisture tolerance • Permanent, high-strength, waterproof and elastomeric bond • Ideal for heavy rolling loads & high traffic • Installs LVF glue-down and vinyl-back sheet products • Bond warranty applies if used with other manufacturers’ like products • Residential, Light Commercial and Main Street rated and warranted • Excellent plasticizer migration resistance • Low VOC, extremely low odor • 250 sq. ft. coverage per gallon (1/16” x 1/32” x 1/32”) Approximate Sq Ft Coverage Vased on Trowel/Nap Roller Size : 1/16” x 1/16” x 1/16” U Notched Trowel - 150 sf coverage 1/32” x 1/32” x1/16” U Notched Trowel - 250 sf coverage 3/8”Nap Roller - 350 sf coverage Application Instructions: Follow Mannington’s guidelines for layout, design and any special precautions for installation. 1. Spread adhesive using required tools. 2. Install flooring per specific flooring type instructions. (flash and working times dependent upon temperature and humidity). Trowel: Flash time is 10-30 minutes. Adhesive will darken slightly to visually cue the installer. Working time up to 2.5 hours. Adhesive transfer required. Roll flooring with a minimum 75 lb. three section floor roller. 3/8” Nap Roller: Flash time is 20-40 minutes. Allow M-Grip™ to darken and become tacky. 2.5 hours working time. Curing Time: Mannington M-Grip™ has an approximate 12 cure time. 24 hours for heavy traffic and 48 hours for rolling load traffic. Exact cure time varies with temperature, humidity and porosity of materials/substrates. Store in a cool, dry area away from direct sunlight. Mannington M-Grip™ should be stored at temperatures between 50-90°F (15-32°C). While this product is freeze-thaw stable, it is necessary to protect it from freezing. Freeze/ thaw stable to 10°F (-12°C). Shelf life is two years on properly stored unopened containers; storing at elevated temperatures will reduce shelf life. Two year shelf life (unopened)

<h4>Mannington ADURA® OneNose™ Step Nosing – 94"</h4> <p>The Mannington ADURA® OneNose™ Step Nosing provides a durable, seamless finish for staircases, open railings, and sunken room transitions. Designed for ADURA® flooring, it supports both flush and overlap installations using the included shim system.</p> <h4>Key Features</h4> <p><strong>• Versatile installation:</strong> Works with flush or overlap stair nose applications<br> <strong>• Includes shims:</strong> Two shims for height adjustment<br> <strong>• Premium construction:</strong> Durable, secure fit for ADURA® floors<br> <strong>• Made in the USA</strong></p> <h4>Specifications</h4> <p><strong>Width:</strong> 3.25"<br> <strong>Height:</strong> 1.6"<br> <strong>Length:</strong> 94"<br> <strong>Compatibility:</strong> ADURA® flooring (2.5mm, 4–6mm, 8mm)</p> <h4>Shim Requirements</h4> <p><strong>2.5mm flooring:</strong> Overlap only; no shims<br> <strong>4–6mm flooring:</strong> Flush = no shims; Overlap = one shim<br> <strong>8mm flooring:</strong> Flush = two shims; Overlap = three shims</p> <h4>Installation Overview</h4> <p>1. Measure and cut the molding; use shims as needed.<br> 2. Apply Mannington TripleStick™ adhesive inside the curved and flat areas of the nosing.<br> 3. Roll the molding into place and press firmly to ensure full contact with the stair nose and substrate.<br> 4. Bond shims using MSS‑20 or M‑Weld.<br> 5. Allow 24 hours of cure time before foot traffic.</p>