Lions Floor Bambino SPC Vienna Toast

<h3>Protection from Moisture Has Never Been Easier</h3> <p><strong>Use this thin, durable, and affordable vapor barrier!</strong> Use the Lions Floor Moisture barrier for floating flooring installations over concrete or any subfloor with potential moisture issues.</p> <p><strong>Lions Floor Moisture Barrier</strong> can be used with laminate and SPC products with pre-attached underlayment pad. Follow these easy instructions to get your vapor barrier installed correctly!</p> <h4>Specifications:</h4> <ul> <li><strong>Product Code:</strong> UL-MB6</li> <li><strong>Type:</strong> Moisture/Vapor Barrier Underlayment</li> <li><strong>Material:</strong> Polyethylene Film</li> <li><strong>Thickness:</strong> 6 mil</li> <li><strong>Roll Weight:</strong> 14.5 lbs</li> <li><strong>Square Feet per Roll:</strong> 500 sq. ft.</li> <li><strong>Warranty:</strong> Limited Lifetime</li> <li><strong>Dimensions:</strong> 125 ft. Length x 4 ft. Wide</li> <li>Includes overlap and tape for easy installation.</li> </ul> <h4>Gather Your Tools:</h4> <p>Good organization will help to start your project smoothly. Gather all your supplies for both the underlayment and flooring installation.</p> <ul> <li>Lions Floor Moisture Barrier Underlayment</li> <li>Waterproof Tape</li> <li>Scissors or Utility Knife</li> <li>Broom or Shop Vac</li> </ul> <h4>Begin the Installation:</h4> <p><strong>Step 1: Properly Prepare your Subfloor</strong></p> <p>Before you start installing the vapor barrier, properly prepare your subfloor. Follow the flooring installation requirements for the flooring product you will be installing. Your area should be completely free of dust and debris.</p> <p><strong>Step 2: Lay the Rows of Underlayment</strong></p> <p>Roll the moisture barrier out perpendicular to the direction you are installing your floor. You will want to overlap the vapor barrier 4” to 6” and use the attached edge tape on the product to bond seams. All cross seams and fill pieces that have no edge tape should be overlapped and use waterproof tape to bond seams. You can let the moisture barrier run up the wall slightly where it will be covered by the baseboard or quarter round after flooring installation is complete. Continue laying rows until the entire flooring installation area is completely covered and all seams are overlapped and taped.</p>