Daltile Stone Attache - Haut Monde - Nobility White - 24 x 24 - Matte
Nobility White is defined by warm off-white, cream, and soft sand tones. Its matte finish limits glare, while the surface remains light and calm without looking flat or stark.
The large square creates an orderly grid with fewer joints than smaller formats. The 24 x 24 format emphasizes an orderly large-square layout. V3 variation can create noticeable piece-to-piece shifts.
Matte Sandstone Character and Verified Specifications
- Matte Nobility White finish with V3 high variation and warm off-white, cream, and soft sand tones.
- Nominal 24 x 24 format; actual dimensions are 23-3/8 x 23-3/8 inches.
- Packaged at 15.20 sq. ft. per carton with 4 tiles per carton.
- Test data lists less than 0.5 percent water absorption, breaking strength over 275 pounds, MOHS 8 hardness, and chemical resistance.
- For dry interior floors, wet level interior floors in matte, walls, backsplashes, and countertops; review exterior conditions separately.
- TruEdge rectified edges and wear rating 4 support residential and commercial use.
Layout, Installation, and Use
Plan this large square around substrate flatness, mortar coverage, handling, and layout. Use a 1/8-inch joint for standard installation and 3/16 inch in modular layouts; latex-modified thin-set is recommended. Confirm drainage, moisture, traffic, slip-resistance, and intended-use requirements for the jobsite before work begins. Review final application conditions, layout direction, and grout planning with the installer before materials are ordered.
Use this format when the project needs an orderly large-square layout; it provides a light, controlled sandstone visual on a matte surface. Verify installed-area requirements before setting.
